Short Description (20 words or less): *

Full Description: *

The RF tag on the liner pallets is above the surface of the pallet and gets broken off in the liner process. One liner pallet will ride on top of another and when that happens the RF tag gets broken off. This happens up to 8 times per week and they have been unable to prevent the pallets from riding on top of each other. Install a 5/8" bolt with a 3/16" lock washer in the lift ring bolt hole. The head of the bolt will be above and in front of the RF tag thus protecting it from damage. This has been tried on a trial pallet to make sure that it would prevent the problem and there wouldn't be any interference problem in the system. There were no problems experienced. NOTE - The liner pallet model must be imported to teamcenter to complete this work request. See John Keyes.

File Attachments:

	File Name	Description	User Name	Upload Date
Delete	PS0904.ppt	Add bolt to liner pallets	Appold, Brian (qz0qsm)	1/30/2009 3:45:00 PM

Submit Attachment:

File:

Description:

Add

Primary Part Information:   Select*

Program	Part Type	Part #	Design Phase	Location	PTE	Status
GEN IV	Block	12571048	Prod	Saginaw	Appold, Brian	Complete - Approved

Impacted Part Information:

Program	Part Type	Part #	Design Phase	Location	PTE	Status
GEN IV	Block	12577461	Prod	Saginaw	Appold, Brian	Complete - Approved

Location Information:

Location	TM	Approval Date	Priority	Status
Saginaw	Bujouves, Jim	2/2/2009 6:55:04 AM	Normal	Approved