Short Description (20 words or less): *

Full Description: *

On the IBCC, the limits can fail due to the resin/sand/pattern spray that gets into the current pnuematic prox switches. This causes downtime on the machines. On IBCC tooling; Install an electical prox switch on the tooling which is capable of measuring the .004" limit required. This prox has been tested and was shown capable of measuring that distance,(see attached). These are fully sealed so they should be resistant to sand/spray. An 8 mm Pepperl + Fuchs limit, Part# 801375, will be used. A block that will house the switch will have to be made also (see attached). There are no changes required to the machine or PLC. Prevent limit failures from occcuring on the machines. In part, to resolve QN916 FR-319 Refer to temp PS 08-58 for attachments. PS0858cap.bmp; PS0858block.bmp

File Attachments:

	File Name	Description	User Name	Upload Date
Delete	PS0858cap.bmp.url	Electrical prox dims	Appold, Brian (qz0qsm)	1/31/2012 9:18:19 AM
Delete	PS0858block.bmp.url	Prox block	Appold, Brian (qz0qsm)	1/31/2012 9:21:59 AM

Submit Attachment:

File:

Description:

Add

Primary Part Information:   Select*

Program	Part Type	Part #	Design Phase	Location	PTE	Status
GEN IV	BLOCK	12571048	Prod	Saginaw	Appold, Brian	Complete - Approved

Impacted Part Information:

Program	Part Type	Part #	Design Phase	Location	PTE	Status
GEN IV	BLOCK	12577461	Prod	Saginaw	Appold, Brian	Waived

Location Information:

Location	TM	Approval Date	Priority	Status
Saginaw	Bujouves, Jim	1/31/2012 9:34:29 AM	Normal	Approved