Short Description (20 words or less): *

Full Description: *

Complete the following changes in conjunction with PPCRs 1094 and 1095. 1. Increase the draft on the bottom of the lifting lugs to 30 degrees. 2. Add a backup jack screw position adjacent to each existing jack screw. 3. Fill the gap between the drafted "4 corners" closure and the center "tent" at the pour tower (2 places). 4. Reduce/eliminate the flash between the core and core location features in the base mold (magnitude TBD Friday, 22 July) 5. Add a closeoff/metal turn to the "tent" features at the pour and opposite pour ends to prevent metal from flashing under the "diving boards." 6. Add closeoffs/metal turns to each of the diving boards. 7. Add metal turns to the slides, contoured to the outermost edges of the cavities (similar to current Carrier). 8. Weld up the rope seal tracks. 9. Populate the part number wheels. 10. Remove the shims behind the mold inserts and cut the frames to allow proper mold closure. 11. Add "wedge" features to the top of the parting line risers to initiate piping.

File Attachments:

File Name

Description

User Name

Upload Date

Submit Attachment:

File:

Description:

Add

Primary Part Information:   Select*

Program	Part Type	Part #	Design Phase	Location	PTE	Status
AXLE PARTS	TUBE	84094549	Prod	Saginaw	Appold, Brian	WIP

Impacted Part Information:

Location Information:

Location	TM	Approval Date	Priority	Status
Saginaw	Waters, Russ	7/27/2016 12:56:44 PM	Normal	Approved