Short Description (20 words or less): *

Full Description: *

SPM Molds are filled to the midpoint or slightly higher of a 5.2mm tolerance. There are sporadic occurrences of short risers that may be related to how the ladle fills. CAST LINE 1 had a change in the dip angle to increase the volume of metal delivered to the mold to increase the overall riser height by +1.0 mm to +1.5 mm. (just at or slightly above the high riser mark) and short riser scrap has reduced considerably PPCR - 2016-1823-C-SAG. Modify the RH & LH top cores to change from the current design of 5.2 mm difference between High-Low indicator to a difference of 7.2mm only adjusting the High limit witness line.. (See PowerPoint for visual)

File Attachments:

	File Name	Description	User Name	Upload Date
Delete	High-LowindicatorchangeHFV6heads.pptx	HIGH LIMIT	(dzsk2p)	1/9/2017 9:01:24 AM

Submit Attachment:

File:

Description:

Add

Primary Part Information:   Select*

Program	Part Type	Part #	Design Phase	Location	PTE	Status
HFV6	HEAD	12647554	Prod	Saginaw	Waters, Russ	WIP

Impacted Part Information:

Program	Part Type	Part #	Design Phase	Location	PTE	Status
HFV6	HEAD	12647555	Prod	Saginaw	Waters, Russ	Complete - Approved

Location Information:

Location	TM	Approval Date	Priority	Status
Saginaw	Bujouves, Jim	1/9/2017 9:06:04 AM	Urgent	Approved